1/1
1/1
INSULATED BOLTED TERMINAL LUG ICL-185-400
Categories: Cable connectors
Exhibitor Information
Yuyao Jera Line Co.,Ltd
INSULATED BOLTED TERMINAL LUG FOR 400 sqm, ICL-185-400, other called Pre-insulated mechanical terminal lug, is used for termination of power cables started from 185 sqm to 400 sqm. The terminal lug ICL-185-400 is applied with the following cables:
Low voltage power cable, overhead and underground.
Solar photovoltaic bus cables in PV combiner boxes.
The ICL type of mechanical bolted cable lugs have sufficient key features:
1.Rapid waterproof insulation without heat or cold shrinks tubes.
2.Spearhead bolts installation with precise torque, no compression tools.
3.Wide range application 16 to 400 mm2.
4.Suitable for aluminum and copper cables.
5.Manufactured according to the standard: EN 50483 & IEC 61238-1.
Welcome to visit our web for more information:https://www.jera-energy.com/
For B2B inquires email: info@jera-energy.com
Watch more via Youtube: https://youtu.be/F09JPZbLWWA
Low voltage power cable, overhead and underground.
Solar photovoltaic bus cables in PV combiner boxes.
The ICL type of mechanical bolted cable lugs have sufficient key features:
1.Rapid waterproof insulation without heat or cold shrinks tubes.
2.Spearhead bolts installation with precise torque, no compression tools.
3.Wide range application 16 to 400 mm2.
4.Suitable for aluminum and copper cables.
5.Manufactured according to the standard: EN 50483 & IEC 61238-1.
Welcome to visit our web for more information:https://www.jera-energy.com/
For B2B inquires email: info@jera-energy.com
Watch more via Youtube: https://youtu.be/F09JPZbLWWA
